EPD document EPD-IES-0016742:001 en.pdf

Global

South Korea

EPD-IES-0016742:001 ﻿Aluminum Coated Steel(Al Steel)

This document (version 2.0.X) provides Product Category Rules (PCR) for the assessment of the environmental performance of crude steel and/or basic iron steel products including special steels (except those destined to become construction products) and the declaration of this performance by an EPD.
Basic iron steel products must be considered those semi-finished steels or intermediate special steels that will be further processed to become a finished consumer product. Ingots, blooms, slabs, plates, rolled products (wire rods, bars, flats, billets), cold finished (cold-drawn, peeling/turning and straightening) and basic forged products (bars and flats) in carbon steels, free cutting steels, alloyed steels, spring steels, microalloyed steels, cold forming steels, bearing steels… fall under the scope of this PCR, when they are manufactured with the goal to be supplied to further manufacturers and then transformed in final products like naval chains, bearing steels, tool steels, shafts for automotive industry…etc.
The corresponding UN CPC codes are 4112 &amp; 412.
Related PCRs:
<ul>
<li>Finished Steel products not to be used as construction products must refer to "Fabricated steel products, except construction products PCR" for CPC codes 421+422+423+429 <a href="http://environdec.com/en/PCR/Detail/?Pcr=9754" target="_self">http://environdec.com/en/PCR/Detail/?Pcr=9754</a></li>
</ul>
The PCR document may be downloaded in the EPD Portal. It is free to register in the EPD Portal.

Being updated - Basic iron or steel products & special steels, except construction products

This PCR is being updated, with expected publication date in December 2024. Among others, the updated PCR will align with General Programme Instruction (GPI) version 5, to be published in Q1 2025.
The open consultation is ongoing from 2024-11-06 until 2025-01-06. Any stakeholder is welcome to provide comments on the draft PCR, available for download below. Comments shall be sent to <a href="mailto:g.benito@ik-ingenieria.com" target="_self">the PCR Moderator </a>and <a href="mailto:pcr@environdec.com" target="_self">the Secretaria</a><a href="mailto:pcr@environdec.com" target="_self">t</a> using the Excel template for comments, available for download below.
All dates are preliminary and subject to change.
For question on the PCR, please contact the PCR Moderator <a href="mailto:g.benito@ik-ingenieria.com" target="_self">Gorka Benito Alonso</a> of IK INGENIERIA.
For general questions on the updating process for PCRs, please contact the Secretariat at pcr@environdec.com.
The validity period of the present version of the PCR (Version 2.X.X) was extended with 1 year upon initiation of the PCR updating process.
This document (version 2.1.0) provides Product Category Rules (PCR) for the assessment of the environmental performance of crude steel and/or basic iron steel products including special steels (except those destined to become construction products) and the declaration of this performance by an EPD.
Basic iron steel products must be considered those semi-finished steels or intermediate special steels that will be further processed to become a finished consumer product. Ingots, blooms, slabs, plates, rolled products (wire rods, bars, flats, billets), cold finished (cold-drawn, peeling/turning and straightening) and basic forged products (bars and flats) in carbon steels, free cutting steels, alloyed steels, spring steels, microalloyed steels, cold forming steels, bearing steels… fall under the scope of this PCR, when they are manufactured with the goal to be supplied to further manufacturers and then transformed in final products like naval chains, bearing steels, tool steels, shafts for automotive industry…etc.
Also pig iron is within the scope of the PCR.
The corresponding UN CPC codes are 4112 &amp; 412.
Related PCRs:
<ul>
<li>Finished Steel products not to be used as construction products must refer to "Fabricated steel products, except construction products PCR" for CPC codes 421+422+423+429 <a href="http://environdec.com/en/PCR/Detail/?Pcr=9754" target="_self">http://environdec.com/en/PCR/Detail/?Pcr=9754</a></li>
</ul>
The PCR document may be downloaded in the EPD Portal. It is free to register in the EPD Portal.
Your use of this material is subject to the General Terms of Use published on by EPD International AB:s homepage at <a href="https://www.environdec.com/contact/General-terms-of-use/" target="_self">https://www.environdec.com/contact/General-terms-of-use/</a>. If you have not registered and accepted EPD International AB:s the General Terms of Use, you are not authorized to exploit this work in any manner.

al pic.png

An 89% AI - 9% Si alloy hot-dipped cold rolled steel sheet. It is applied to home appliances and exhaust system components, featuring a superior heat resistance to cold rolled steel sheets and superior water, corrosion and heat resistance to galvanized steel sheets by virtue of the passive film (AI2O3) formed on the surface of the AI plating layer.

﻿Aluminum Coated Steel(Al Steel)

The International EPD System (IES) is a global programme for Environmental Product Declarations (EPDs), a Type III environmental declaration following the principles of ISO 14025. IES is operated by EPD International AB, a subsidiary fully owned by IVL Swedish Environmental Research Institute.

Our newsletter offers news and updates six times a year.

Aluminum Coated Steel(Al Steel)

Product information

Detailed information

EPD Owner

EPD documents