ConProtect All-time

ConProtect All-time acts as a protective barrier for concrete, clinker masonry and ceramic tiles, repelling water and preventing the absorption of water-soluble contaminants into mineral surfaces.

The product is shipped to the consumer in 1000L IBC containers, which are returned to SL Protection and reused. Packaging materials are not included in this assessment, as they are returned to the manufacturer after use by the client - the packaging can be used an indefinite number of times.

Technical specification:

Mass loss:

Mass loss after freeze–thaw cycles in salt solution according to EN 13581.

The surface mass loss of the impregnated specimen must appear at least 20 cycles later than on the non-impregnated specimen.

Depth of penetration:

Class II: ≤ 10 mm

Water absorption and alkali resistance:

Water absorption and alkali resistance according to EN 13580.

Water absorption factor < 7.5% compared to the untreated specimen.

Water absorption factor (after immersion in alkaline solution) < 10%.

Drying rate:

Drying rate according to EN 13579.

Class II: > 10%

Physical properties of the product: Appearance: liquid. Colour: clear. Density: 0.88 ± 0.1 g/ml.