ROKOFLOOR® GW 8 - RK 814

Product name: ROKOFLOOR® GW8 

Product identification: Epoxy penetration to be used with a dry, wet or fresh concrete with up to 8% of 

base humidity, for anhydrite, plasterboard, metals and/or other problematic surfaces

UN CPC code: 35110

Product description: ROKOFLOOR® GW8 is low-viscosity, two-component penetration resin without 

a content of solvents, and with a low content of VOCs. ROKOFLOOR® GW8 may not be processed 

at the surrounding and base temperatures below +7 °C and above + 30 °C. The minimum recommended 

temperature is +12 °C (at the temperatures below +12 °C, its viscosity increases, the material becomes 

denser). ROKOFLOOR® GW8 recommended application temperature is + 20 °C and relative air 

humidity up to 65 %. During the application and curing processes, the material may not get into a contact 

with water or another chemical. The base temperature may not be lower than +3 °C above the dew 

point. The conditions must be observed for the entire processing time, until the material becomes fully 

cured. The material is suitable in floor creation in manufacturing facilities, stores, car repair service 

buildings and, also, in e.g. parking lots