ROKOFLOOR® EP 315 - RK 884

Product name: ROKOFLOOR® EP 315

Product identification: Pigmented, elastic, flexible material, polyurethane – epoxy-based, to be used 

in cast floors and coats where requirements on elasticity and crack bridging are pronounced. 

UN CPC code: 35110

Product description: ROKOFLOOR® EP 315 is two-component product which is especially designed to 

make cast floors, smooth coats, anti-slipping and parking ROKOFLOOR® systems. The material 

is suitable in floor creation in manufacturing facilities, stores, car repair service buildings and, also, in 

e.g. parking lots. ROKOFLOOR® EP 315 may not be processed at the surrounding and base 

temperatures below +9 °C and above + 30 °C. The minimum recommended temperature is +12 °C (at 

the temperatures below +12 °C, its viscosity increases, the material becomes denser). ROKOFLOOR® 

EP 315 recommended application temperature is + 20 °C and relative air humidity is up to 65%. During 

the application and curing processes, the material may not get into a contact with water or another 

chemical. The base temperature may not be lower than +3 °C above the dew point. The conditions must 

be observed for the entire processing time, until the material becomes fully cured.