ROKOFLOOR® ELASTIC PLUS - RK 888

Product name: ROKOFLOOR® ELASTIC PLUS RK 888

Product identification: Flexible polyurethane membrane bridging both static and dynamic cracks. 

Perfect hydro-insulation, ductility of ca 600%.

UN CPC code: 35110

Product description: ROKOFLOOR® ELASTIC PLUS is pigmented, elastic, low-viscosity, 

two component material not including solvents, on polyurethane basis. ROKOFLOOR® ELASTIC PLUS 

may not be processed at the surrounding and base temperatures below +7 °C and above + 30 °C. 

The minimum recommended temperature is +12 °C (at the temperature below +12 °C, its viscosity 

increases, the material becomes denser). Recommended material temperature for an application is 

+ 20 °C, and relative air humidity should be less than 65 %. During the application and curing process, 

the material may not come into a contact with water or another chemicals. The base temperature may 

not be lower than +3 °C above the dew point. The conditions must be observed for the entire processing 

time, until the material becomes fully cured. The material is suitable in floor creation in manufacturing 

facilities, stores, car repair service buildings and, also, in e.g. parking lots.