ROKOFLOOR® INDUSTRY ESP - RK 878

Product name: ROKOFLOOR® INDUSTRY ESP - RK 878 

Product identification: Pigmented epoxy compound for a creation of anti-slip floor systems with sand 

screening.

UN CPC code: 35110

Product description: ROKOFLOOR® INDUSTRY ESP is especially designed for making of slip-resistant 

flooring systems filled with sand. The material is suitable for making floors in the industrial halls, storage 

facilities, car repair areas, parking lots, schools, canteens, etc. ROKOFLOOR® INDUSTRY ESP may 

not be processed at the surrounding and base temperatures below +7 °C and above + 30 °C. 

The minimum recommended temperature is +12 °C (at the temperature below +12 °C, its viscosity 

increases, the material becomes denser). Recommended material temperature for an application is 

+ 20 °C, and relative air humidity should be less than 65 %. During the application and curing process, 

the material may not come into a contact with water or another chemicals. The base temperature may 

not be lower than +3 °C above the dew point. The conditions must be observed for the entire processing 

time, until the material becomes fully cured. The material is to be applied with an adequate consumption 

of 0.6 – 1 kg/m2, at best using rubber palette-knife, on a penetrated base treated with sand.