ROKOFLOOR® PU 420 UV - RK 880

Product name: ROKOFLOOR® PU 420 UV - RK 880

Product identification: Pigmented, low-viscosity, two-component polyurethane-based material not 

containing solvents, with a high UV stability.

UN CPC code: 35110

Product description: ROKOFLOOR® PU 420 UV is especially designed for making cast floors and 

smooth coats, and anti-slip systems. ROKOFLOOR® PU 420 UV is suitable to provide floors in 

the industrial halls, storage facilities, car repair services, side walks, concrete tanks, etc. The material 

may not be processed at the surrounding and base temperatures below +10 °C and above + 30 °C. 

The minimum recommended temperature is +12 °C (at the temperature below +12 °C, its viscosity 

increases, the material becomes denser). Recommended material temperature for an application is 

+ 20 °C, and relative air humidity should be less than 65 %. During the application and curing process, 

the material may not come into a contact with water or any other chemical. The base temperature may 

not be lower than +3 °C above the dew point. The conditions must be observed for the entire processing 

time, until the material becomes fully cured.