EPD document EPD-IES-0007801:001 (S-P-07801) en.pdf

Denmark

EPD-IES-0007801:001 (S-P-07801) Aggregates from DrySand - Køge

Process certification EPD-IES-0007801:001 (S-P-07801) en.pdf

Being updated - Construction products (EN 15804+A2)

This PCR is being updated. The open consultation is ongoing from 2024-10-03 until 2024-11-28. Any stakeholder is welcome to provide comments on the draft PCR, available for download below. Comments shall be sent to <a href="mailto:martin.erlandsson@ivl.se" target="_self">the PCR Moderator</a> and <a href="mailto:pcr@environdec.com" target="_self">the Secretariat</a> using the Excel template for comments, available for download below.
2024-04-30 an updating process was inititiated. This is a large update to prolong the validity with another 4 or 5 years. There will be an open consultation and a review, and the new version (v2.0.0) is expected to be published in February 2025.
The main aim of this update is to comply with General Programme Instructions (GPI) version 5.0.0 (recently published), the next versions of the ECO Platform standards (to be published late 2024), and EN 15941 (recently published).
Upon initiation of the PCR updating process, a minor update of the current version was done to prolong its validity with six months, until 2025-06-20. This means there will be a transition period until 2025-06-20 under which both version 1.3.X and version 2.0.0 are applicable.
In addition to the prolonged validity period, version 1.3.4 opens up for declaring environmental performance results based on location-based electricity modelling as additional results.This was done to answer a market need for comparability of EPDs following different electricity modelling approaches. Read more in Section 5.4.5 of the PCR.
Versions 1.3.3 and 1.3.4 do not include any changes in requirements compared to version 1.3.2, and these versions are therefore fully aligned. As such, EPDs verified after 2024-03-01 may still refer to version 1.3.2 or 1.3.3 of the PCR.
Version 1.3.2 included mainly editorial changes and clarifications, but also a few changes in requirements due to ECO Platform decisions. Therefore, versions 1.3.1 was valid in parallel to version 1.3.2 during a transition period that ended 2024-02-29.
One added requirement of version 1.3.2 took immediate effect for all applicable versions of PCR 2019:14 (i.e., also for EPDs based on v1.2.5 and v1.3.1) as of 2023-12-18 16:00 CET. This concerns the rule that free assignment of contractual instruments for electricity within an entity (e.g., a manufacturing site), producing several products and covered by a single electricity contract, is no longer allowed. The immediate effect of this rule is to comply with ECO Platform requirements. The date and time of when this rule took immediate effect, is based on when the rule was communicated to ECO Platform members (2023-12-15) plus a few days to update this text in the PCR Library.
We recommend using the newest version of the PCR.
For more information on differences between versions, see the version history of the PCR (Section 8).
This document serves as Product Category Rules (PCR) for Construction products. It aims to be the main way to develop and register EPDs in the International EPD System, compliant with the European standard EN 15804:2012+A2:2019/AC:2021 (Sustainability of construction works - Environmental product declarations - Core rules for the product category of construction products).
This PCR allows for an EPD to be produced either:
<ul>
<li>directly using this PCR, or</li>
<li>using this PCR document together with one or several c-PCR(s).</li>
</ul>
The following c-PCRs currently exist, and shall be used in addition to this document for the relevant product categories:
<ul>
<li>c-PCR-001 Cement and building lime</li>
<li>c-PCR-002 Ceramic tiles</li>
<li>c-PCR-003 Concrete and concrete elements</li>
<li>c-PCR-004 Resilient, textile and laminate floor coverings</li>
<li>c-PCR-005 Thermal insulation products</li>
<li>c-PCR-006 Wood and wood-based products for use in construction</li>
<li>c-PCR-007 Windows and doors</li>
<li>c-PCR-008 Lifts (elevators)</li>
<li>c-PCR-009 Flat glass products</li>
<li>c-PCR-010 Guardrails and bridge parapets</li>
<li>c-PCR-011 Substantial materials for air ducts</li>
<li>c-PCR-012 Rehabilitation of highways, strees and roads</li>
<li>c-PCR-013 Prefabricated buildings intended as special-purpose transportable units</li>
<li>c-PCR-014 Acoustical wall and ceiling solutions</li>
<li>c-PCR-015 Synthetic carpet yarn</li>
<li>c-PCR-016 Photovoltaic modules and parts thereof</li>
<li>c-PCR-017 Technical-chemical products (for construction sector)</li>
<li>c-PCR-018 Ventilation components</li>
<li>c-PCR-019 Electrical cables and wires (for construction sector)</li>
<li>c-PCR-020 Building hardware</li>
<li>c-PCR-021 Furniture</li>
<li>c-PCR-022 Road infrastructure</li>
<li>c-PCR-023 Railway infrastructure</li>
<li>c-PCR-024 PV components: invertors, battery energy storage systems, combiner boxes and tracker systems</li>
<li>c-PCR-025 Escalators and moving walks</li>
<li>c-PCR-026 Concrete batching plants</li>
<li>c-PCR-027 Fan coils</li>
<li>c-PCR-028 Bituminous mixtures</li>
<li>c-PCR-029 Buildings</li>
<li>c-PCR-030 Abrasive products</li>
<li>c-PCR-031 Gypsum products</li>
</ul>
Additional c-PCRs are currently under development and adoption.
The PCR and the c-PCRs may be downloaded in the EPD Portal. It is free to register in the EPD Portal.
Your use of this material is subject to the General Terms of Use published on by EPD International AB:s homepage at <a href="https://www.environdec.com/contact/General-terms-of-use/" target="_self">https://www.environdec.com/contact/General-terms-of-use/</a>. If you have not registered and accepted EPD International AB:s the General Terms of Use, you are not authorized to exploit this work in any manner.

Bild1.jpg

The product included in this EPD, DrySand aggregates, is manufactured at the site DrySand operated by NCC Industry A/S in Køge, Denmark. The product consists of dried sand and is used for industrial purposes such as mortar production, sandblasting and filter sand for waterworks, but also sand for the energy sector and for artificial turf fields etc.

Aggregates from DrySand - Køge

The International EPD® System is a global programme for Environmental Declarations. Environmental Product Declarations (EPD) present transparent, verified and comparable information about the life-cycle environmental impact of products and services.

Our newsletter offers news and updates six times a year.

Aggregates from DrySand - Køge

Product information

Detailed information

EPD Owner

EPD documents

Other documents