EPD-IES-0025900:002

Prefabricated reinforced concrete walls

Prefabricated wall elements manufactured by GOLDBECK Comfort are designed in accordance with the applicable PN-EN standards and meet the highest requirements in terms of load-bearing capacity, insulation and durability. We offer solutions tailored to various structural and architectural applications. The manufacturing process begins with order acceptance, followed by production planning and procurement of necessary materials. Parallel to this, reinforcements are manufactured and molds are prepared. Once all materials and components are ready, reinforcements and accessories are installed in the mold. Simultaneously, concrete mix is produced and then poured into the form. After the concrete has set, the element is demolded and marked. Finally, the finished items are shipped to the customer.

General information

EPD OwnerGOLDBECK Prefab Elements Sp. z o.o.
Registration numberEPD-IES-0025900:002
PCR2019:14 Construction products (EN 15804+A2) 2.0.1
c-PCR2019:14-c-PCR-003 Being updated - Concrete and concrete elements (EN 16757) 1.0.0
StatusValid
Publication date2025-09-26
Valid until2030-09-25
EN 15804 compliantYes
Geographical scopeEurope

Programme information

ProgrammeInternational EPD System
AddressEPD International AB Box 210 60 SE-100 31 Stockholm Sweden
Websitewww.environdec.com
E-mailsupport@environdec.com

Product category rules

CEN standard EN 15804 serves as the Core Product Category Rules (PCR)
Product Category Rules (PCR)PCR 2019:14 Construction products (EN 15804+A2) (2.0.1)
PCR review was conducted byThe Technical Committee of the International EPD System. See www.environdec.com for a list of members. Review chair: Rob Rouwette (chair), Noa Meron (co-chair). The review panel may be contacted via the Secretariat www.environdec.com/support.
Complementary Product Category Rules (c-PCR)PCR 2019:14-c-PCR-003 Being updated - Concrete and concrete elements (EN 16757) (1.0.0) Version: 1.0.0
c-PCR review was conducted byThe Technical Committee of the International EPD System

Verification

LCA accountabilityBartosz Zymanczyk, bartosz.zymanczyk@exergy.pl, GOLDBECK Prefab Elements Sp. z o.o.
Independent third-party verification of the declaration and data, according to ISO 14025:2006, via
Third-party verifierAgnieszka Pikus (Agnieszka Pikus Greenwise)
Approved byInternational EPD System
Procedure for follow-up of data during EPD validity involves third party verifier
*EPD Process Certification involves an accredited certification body certifying and periodically auditing the EPD process and conducting external and independent verification of EPDs that are regularly published. More information can be found in the General Programme Instructions on www.envrondec.com.

Ownership and limitation on use of EPD

Limitations

EPDs within the same product category but published in different EPD programmes, may not be comparable. For two EPDs to be comparable, they shall be based on the same PCR (including the same first-digit version number) or be based on fully aligned PCRs or versions of PCRs; cover products with identical functions, technical performances and use (e.g. identical declared/functional units); have identical scope in terms of included life-cycle stages (unless the excluded life-cycle stage is demonstrated to be insignificant); apply identical impact assessment methods (including the same version of characterisation factors); and be valid at the time of comparison.

Ownership

The EPD Owner has the sole ownership, liability, and responsibility for the EPD.

Information about EPD Owner

EPD OwnerGOLDBECK Prefab Elements Sp. z o.o.
Contact person nameRafal Ziolkowski
Contact person e-mailrafal.ziolkowski@goldbeck.pl
Organisation addressPoland Lwówek Ślaski 59-600 Rakowice Małe 17

Description of the organisation of the EPD Owner

GOLDBECK Comfort Sp. z o. o. is part of the international GOLDBECK GmbH Group – one of the European leaders in industrial system construction. The company operates in Poland through its two precast concrete production facilities in Rakowice Małe and Toruń. GOLDBECK offers comprehensive design, prefabrication, and assembly of precast concrete elements used in office, industrial, and logistics buildings.

Organisation images

Organisation logo

Product information

Product namePrefabricated reinforced concrete walls
Product identificationInternal identification. Identification based on the label on the item.
Product descriptionPrefabricated wall elements manufactured by GOLDBECK Comfort are designed in accordance with the applicable PN-EN standards and meet the highest requirements in terms of load-bearing capacity, insulation and durability. We offer solutions tailored to various structural and architectural applications. The manufacturing process begins with order acceptance, followed by production planning and procurement of necessary materials. Parallel to this, reinforcements are manufactured and molds are prepared. Once all materials and components are ready, reinforcements and accessories are installed in the mold. Simultaneously, concrete mix is produced and then poured into the form. After the concrete has set, the element is demolded and marked. Finally, the finished items are shipped to the customer.
Product information from external sourcesManufactured in accordance with applicable European and national standards, including: 1) EN 13369: Common rules for precast concrete products, 2) EN 13225: Linear structural elements, 3) DIN 1045-2 and DIN 1045-4: for German market applications, 4) Internal technical specifications of GOLDBECK Comfort Sp. z o. o.
Technical purpose of productI. Solid walls (single-layer) Application: • structural and partition elements, • internal and external walls in industrial, office and residential buildings. 2. Layered walls (three-layer) Application: • external walls in halls, warehouses, commercial facilities, • passive or energy-saving solutions.
Manufacturing or service provision descriptionI. Solid walls (single-layer) Technical parameters: • Thickness: 120–320 mm, • Concrete class: C30/37 to C50/60, • Main reinforcement: B500B/B500SP steel or welded mesh, • Manufacturing tolerances: according to PN-EN 13369 and PN-EN 14992, • Possibility to include installations (boxes, channels) in the prefabrication process, • Different dimensions depending on the project, • Fire resistance up to REI240 (depending on the design), • Possibility of making openings for windows and doors. 2. Layered walls (three-layer) Technical parameters: • Heat transfer coefficient U: from 0.15 to 0.30 W/m²K (depending on the thickness of insulation), • Thermal bridges minimized thanks to system stainless steel connectors, • Fire resistance: REI 60–REI 240, • Surface finish: smooth, formed, textured, colored.
Material propertiesVolumetric mass density: 2307.53 kg/m3
Manufacturing siteGOLDBECK Comfort Sp. z o.o. GOLDBECK Comfort Sp. z o.o. Poland Lwówek Śląski 59-600 Rakowice Małe 17
Manufacturing site 2GOLDBECK Comfort Sp. z o.o. GOLDBECK Comfort Sp. z o.o. Poland Toruń 87-100 Toruń
UN CPC code3755. Prefabricated structural components for building or civil engineering, of cement, concrete or artificial stone
Geographical scopeEurope
Actual or technical lifespan50 year(s)

Product images

Content declaration

Hazardous and toxic substancesThe product does not contain any substances from the SVHC candidate list in concentrations exceeding 0.1% of its weight.
Product content
Content nameMass, kgPost-consumer recycled material, mass-% of productBiogenic material, mass-% of productBiogenic material1, kg C/declared unit
CEM I301.05000
CEM II110.3000
Limestone floud123.55000
Sand 0-2 mm508.45000
Gravel 2-8 mm461.55000
Gravel 8-16 mm504.15000
Admixture 11.96000
Admixture 21.53000
Admixture 30.54000
Admixture 43.48000
Reinforcing steel78000
Structural steel (eco)54000
Structural steel62.85000
Admixture 50.84000
Admixture 691.69000
Auxiliary materials3.6000
Total2307.54000
Note 11 kg biogenic carbon is equivalent to 44/12 kg of CO2

LCA information

EPD based on declared or functional unitDeclared unit
Declared unit and reference flowPrefabricated reinforced concrete walls Volume: 1 m3
Conversion factor to mass2307.53
Are infrastructure or capital goods included in any upstream, core or downstream processes?
Datasources used for this EPDecoinvent database (general) ecoinvent 3.10 database
LCA SoftwareOpenLCA OpenLCA 2.2.0
Version of the EN 15804 reference packageEF Reference Package 3.1
Characterisation methodsWeighted method.
Technology description including background systemAccording to the issued process diagram.
Scrap (recycled material) inputs contribution levelLess than 10% of the GWP-GHG results in modules A1-A3 come from scrap inputs

Data quality assessment

Description of data quality assessment and reference yearsData quali very good, Reference year 2024. The quality of the relevant data used for the EPD in terms of its time, geography and technology representativeness using EN 15804:2012+A2:2019, Annex E. The relevant data assessed included no "poor” or “very poor” data.
Electricity data
Electricity used in the manufacturing process in A3 (A5 for services)
Type of electricity mixSpecific electricity mix as generated, or purchased from an electricity supplier, demonstrated by a contractual instrument
Energy sourcesHydro4%
Wind10%
Solar5%
Biomass4%
Geothermal0%
Waste0%
Nuclear0%
Natural gas15%
Coal60%
Oil0%
Peat0%
Other2%
GWP-GHG intensity (kg CO2 eq./kWh)0.76 kg CO2 eq./kWh
CO2 uptake associated with carbonation and its assumptions
Production stage (module A)Excluded
Use stage (module B)Excluded
End-of-Life stage (module C)Excluded
Beyond product life cycle (Module D)Excluded

System boundary

Description of the system boundaryb) Cradle to gate with options, modules C1-C4, module D and with optional modules (A1-A3 + C + D and additional modules).
Excluded modulesYes, there is an excluded module, or there are excluded modules
Justification for the omission of modulesB1–B7 (use stage), -These are excluded as the product does not require energy or maintenance during use and is assumed to be passive during its service life. The type of system boundary is defined in and permitted by the PCR 2019:14 Construction Products v2.0.0.

Declared modules

Product stageConstruction process stageUse stageEnd of life stageBeyond product life cycle
Raw material supplyTransportManufacturingTransport to siteConstruction installationUseMaintenanceRepairReplacementRefurbishmentOperational energy useOperational water useDe-construction demolitionTransportWaste processingDisposalReuse-Recovery-Recycling-potential
ModuleA1A2A3A4A5B1B2B3B4B5B6B7C1C2C3C4D
Modules declaredXXXXXNDNDNDNDNDNDNDXXXXX
GeographyEuropeEuropeEuropePolandPolandN/AN/AN/AN/AN/AN/AN/AEuropeEuropeEuropeEuropeEurope
Share of specific data77%--------------
Variation - products0%--------------
Variation - sites1%--------------
DisclaimerThe share of specific/primary data and both variations (products and sites) refer to GWP-GHG results only.

Process flow diagram(s) related images

Additional scenario 0

Name of the additional scenario100% RECYCLING
Description of the additional scenario100% recycling, in which the entire mass after deconstruction is directed to recycling, while landfilling and energy recovery are omitted.

Module A4: Transport to the building site

Description of the additional scenario in module A4Transport (A4) is carried out using a EURO IV diesel truck over an average distance of 100 km, in line with c-PCR-003 recommendations.

Module A5: Installation in the building

Description of the additional scenario in module A5Other installation-related impacts, such as minor packaging waste or fastening components, are also included based on typical site practices.

Module C: End-of-life

Description of the additional scenario in module C100% recycling, in which the entire mass after deconstruction is directed to recycling, while landfilling and energy recovery are omitted.
Module C informationValueUnit
Steel100
%
Concrete100
%

Module D: Beyond product life cycle

Description of the additional scenario in module D100% recycling, in which the entire mass after deconstruction is directed to recycling, while landfilling and energy recovery are omitted.
Module D informationValueUnit
Steel100
%
Concrete100
%

Additional scenario 1

Name of the additional scenario100% LANDFILLING
Description of the additional scenario100% landfill, in which the entire mass is disposed of to landfill, while material recycling and energy recovery are omitted

Module A4: Transport to the building site

Description of the additional scenario in module A4Transport (A4) is carried out using a EURO IV diesel truck over an average distance of 100 km, in line with c-PCR-003 recommendations.

Module A5: Installation in the building

Description of the additional scenario in module A5Other installation-related impacts, such as minor packaging waste or fastening components, are also included based on typical site practices.

Module C: End-of-life

Description of the additional scenario in module C100% landfill, in which the entire mass is disposed of to landfill, while material recycling and energy recovery are omitted
Module C informationValueUnit
Steel0
%
Concrete0
%

Module D: Beyond product life cycle

Description of the additional scenario in module D100% landfill, in which the entire mass is disposed of to landfill, while material recycling and energy recovery are omitted
Module D informationValueUnit
Steel0
%
Concrete0
%

Default scenario

Name of the default scenario100% INCINERATION
Description of the default scenario- A1–A3: Raw material supply, transport, and manufacturing, - A4–A5: Transport to construction site and installation, - C1–C4: Deconstruction, transport, waste processing, and disposal, - D: Benefits and loads beyond system boundary (e.g., recycling potential of steel reinforcement).

Module A4: Transport to the building site

Explanatory name of the default scenario in module A4Transport
Brief description of the default scenario in module A4Transport is carried out using a diesel truck over an average distance of 100 km.
Description of the default scenario in module A4Transport (A4) is carried out using a EURO IV diesel truck over an average distance of 100 km, in line with c-PCR-003 recommendations.

Module A5: Installation in the building

Explanatory name of the default scenario in module A5Assembly
Brief description of the default scenario in module A5Installation includes the consumption of electricity and auxiliary materials.
Description of the default scenario in module A5Other installation-related impacts, such as minor packaging waste or fastening components, are also included based on typical site practices.

Module C: End-of-life

Explanatory name of the default scenario in module CDeconstruction
Brief description of the default scenario in module CAssumptions include 95% recovery of steel and 80% recovery of concrete.
Module C informationValueUnit
Steel95
%
Concrete80
%

Module D: Beyond product life cycle

Explanatory name of the default scenario in module DRecycling of materials
Brief description of the default scenario in module DSteel is assumed to be recovered at a rate of 95% and concrete at 95%.
Description of the default scenario in module DModule D includes the potential environmental benefits from the recovery of materials at end-of-life. A system expansion approach is applied, with credits given for avoided primary production of steel and natural aggregate. Steel is assumed to be recovered at a rate of 95% and concrete at 95%, based on c-PCR recommendations and standard recycling efficiencies. Data for Module D are sourced from ecoinvent 2024.
Module D informationValueUnit
Steel95
%
Concrete95
%

Environmental performance

The estimated impact results are only relative statements, which do not indicate the endpoints of the impact categories, exceeding threshold values, safety margins and/or risks.

Mandatory environmental performance indicators according to EN 15804

Impact categoryIndicatorUnitA1-A3A4A5B1B2B3B4B5B6B7C1C2C3C4D
Climate change - totalGWP-totalkg CO2 eq.5.67E+24.31E+18.47E+1NDNDNDNDNDNDND4.41E+01.29E+13.90E+15.74E+0-4.04E+1
Climate change - fossilGWP-fossilkg CO2 eq.5.66E+24.31E+11.58E+1NDNDNDNDNDNDND4.55E+01.29E+13.89E+15.73E+0-4.03E+1
Climate change - biogenicGWP-biogenickg CO2 eq.1.30E+02.95E-26.89E+1NDNDNDNDNDNDND-1.43E-18.86E-33.20E-21.88E-3-3.11E-2
Climate change - land use and land-use changeGWP-luluckg CO2 eq.1.48E-11.41E-29.48E-3NDNDNDNDNDNDND3.45E-34.23E-37.04E-23.62E-3-6.82E-2
Ozone depletionODPkg CFC-11 eq.1.51E-58.56E-71.25E-7NDNDNDNDNDNDND5.68E-82.57E-76.85E-73.63E-8-6.64E-7
AcidificationAPmol H+ eq.3.52E+21.63E-19.30E-2NDNDNDNDNDNDND3.78E-24.88E-22.74E-11.49E-2-2.67E-1
Eutrophication aquatic freshwaterEP-freshwaterkg P eq.1.03E+05.09E-23.93E-2NDNDNDNDNDNDND1.49E-21.53E-28.93E-24.71E-3-8.92E-2
Eutrophication aquatic marineEP-marinekg N eq.1.51E-13.00E-21.30E-2NDNDNDNDNDNDND7.87E-38.98E-36.46E-23.59E-3-5.93E-2
Eutrophication terrestrialEP-terrestrialmol N eq.1.24E+03.31E-11.48E-1NDNDNDNDNDNDND8.73E-29.92E-26.95E-13.89E-2-6.63E-1
Photochemical ozone formationPOCPkg NMVOC eq.3.31E+03.14E-11.46E-1NDNDNDNDNDNDND8.39E-29.43E-25.95E-13.18E-2-5.85E-1
Depletion of abiotic resources - minerals and metalsADP-minerals&metals1kg Sb eq.1.57E-11.37E-46.42E-5NDNDNDNDNDNDND2.69E-54.23E-58.66E-54.68E-6-8.40E-5
Depletion of abiotic resources - fossil fuelsADP-fossil1MJ, net calorific value0.00E+00.00E+00.00E+0NDNDNDNDNDNDND0.00E+00.00E+00.00E+00.00E+00.00E+0
Water useWDP1m3 world eq. deprived0.00E+00.00E+00.00E+0NDNDNDNDNDNDND0.00E+00.00E+00.00E+00.00E+00.00E+0
AcronymsGWP-fossil = Global Warming Potential fossil fuels; GWP-biogenic = Global Warming Potential biogenic; GWP-luluc = Global Warming Potential land use and land use change; ODP = Depletion potential of the stratospheric ozone layer; AP = Acidification potential, Accumulated Exceedance; EP-freshwater = Eutrophication potential, fraction of nutrients reaching freshwater end compartment; EP-marine = Eutrophication potential, fraction of nutrients reaching marine end compartment; EP-terrestrial = Eutrophication potential, Accumulated Exceedance; POCP = Formation potential of tropospheric ozone; ADP-minerals&metals = Abiotic depletion potential for non-fossil resources; ADP-fossil = Abiotic depletion for fossil resources potential; WDP = Water (user) deprivation potential, deprivation-weighted water consumption
General disclaimerThe results of the end-of-life stage (modules C1-C4) should be considered when using the results of the product stage (modules A1-A3/A1-A5 for services).
Disclaimer 1The results of this environmental impact indicator shall be used with care as the uncertainties of these results are high or as there is limited experience with the indicator

Additional mandatory environmental performance indicators

Impact categoryIndicatorUnitA1-A3A4A5B1B2B3B4B5B6B7C1C2C3C4D
Climate change - GWP-GHGGWP-GHG1kg CO2 eq.5.66E+24.31E+11.58E+1NDNDNDNDNDNDND4.55E+01.29E+13.90E+15.73E+0-4.04E+1
AcronymsGWP-GHG = Global warming potential greenhouse gas.
General disclaimerThe results of the end-of-life stage (modules C1-C4) should be considered when using the results of the product stage (modules A1-A3/A1-A5 for services).
Disclaimer 1The GWP-GHG indicator is termed GWP-IOBC/GHG in the ILCD+EPD+ data format. The indicator accounts for all greenhouse gases except biogenic carbon dioxide uptake and emissions and biogenic carbon stored in the product. As such, the indicator is identical to GWP-total except that the CF for biogenic CO2 is set to zero.

Additional voluntary environmental performance indicators according to EN 15804

Impact categoryIndicatorUnitA1-A3A4A5B1B2B3B4B5B6B7C1C2C3C4D
Particulate matter emissionsPMDisease incidence0.00E+00.00E+00.00E+0NDNDNDNDNDNDND0.00E+00.00E+00.00E+00.00E+00.00E+0
Ionizing radiation - human healthIRP1kBq U235 eq.0.00E+00.00E+00.00E+0NDNDNDNDNDNDND0.00E+00.00E+00.00E+00.00E+00.00E+0
Eco-toxicity - freshwaterETP-fw2CTUe0.00E+00.00E+00.00E+0NDNDNDNDNDNDND0.00E+00.00E+00.00E+00.00E+00.00E+0
Human toxicity - cancer effectsHTP-c2CTUh0.00E+00.00E+00.00E+0NDNDNDNDNDNDND0.00E+00.00E+00.00E+00.00E+00.00E+0
Human toxicity - non-cancer effectsHTP-nc2CTUh0.00E+00.00E+00.00E+0NDNDNDNDNDNDND0.00E+00.00E+00.00E+00.00E+00.00E+0
Land-use related impacts/soil qualitySQP2Dimensionless0.00E+00.00E+00.00E+0NDNDNDNDNDNDND0.00E+00.00E+00.00E+00.00E+00.00E+0
AcronymsPM = Potential incidence of disease due to particulate matter emissions; IRP = Potential human exposure efficiency relative to U235; ETP-fw = Potential comparative toxic unit for ecosystems; HTP-c = Potential comparative toxic unit for humans; HTP-nc = Potential comparative toxic unit for humans; SQP = Potential soil quality index.
General disclaimerThe results of the end-of-life stage (modules C1-C4) should be considered when using the results of the product stage (modules A1-A3/A1-A5 for services).
Disclaimer 1This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.
Disclaimer 2The results of this environmental impact indicator shall be used with care as the uncertainties of these results are high or as there is limited experience with the indicator.

Resource use indicators according to EN 15804

IndicatorUnitA1-A3A4A5B1B2B3B4B5B6B7C1C2C3C4D
PEREMJ, net calorific value6.67E+16.19E+06.13E+0NDNDNDNDNDNDND2.72E+01.86E+05.38E+02.93E-1-5.14E+0
PERMMJ, net calorific value3.15E+24.52E+07.02E+0NDNDNDNDNDNDND5.03E+01.36E+03.93E+02.12E-1-3.90E+0
PERTMJ, net calorific value3.82E+21.07E+11.31E+1NDNDNDNDNDNDND7.75E+03.22E+09.31E+05.05E-1-9.04E+0
PENREMJ, net calorific value1.12E+33.70E+29.62E+1NDNDNDNDNDNDND3.20E+11.11E+23.63E+21.89E+1-3.46E+2
PENRMMJ, net calorific value2.26E+32.56E+27.94E+1NDNDNDNDNDNDND2.63E+17.70E+12.49E+21.31E+1-2.47E+2
PENRTMJ, net calorific value3.38E+36.26E+21.76E+2NDNDNDNDNDNDND5.83E+11.88E+26.12E+23.20E+1-5.93E+2
SMkg8.14E+15.04E-11.24E+0NDNDNDNDNDNDND7.17E-21.51E-13.19E-11.80E-2-3.06E-1
RSFMJ, net calorific value4.45E+11.22E-16.70E-2NDNDNDNDNDNDND1.18E-23.65E-25.37E-22.91E-3-5.11E-2
NRSFMJ, net calorific value6.46E+12.92E-23.33E-2NDNDNDNDNDNDND4.05E-28.77E-31.28E-26.75E-4-1.29E-2
FWm39.85E+02.67E-11.24E+0NDNDNDNDNDNDND1.26E-18.01E-22.83E-11.92E-2-2.87E-1
AcronymsPERE = Use of renewable primary energy excluding renewable primary energy resources used as raw materials; PERM = Use of renewable primary energy resources used as raw materials; PERT = Total use of renewable primary energy resources; PENRE = Use of non-renewable primary energy excluding non-renewable primary energy resources used as raw materials; PENRM = Use of non-renewable primary energy resources used as raw materials; PENRT = Total use of non-renewable primary energy re-sources; SM = Use of secondary material; RSF = Use of renewable secondary fuels; NRSF = Use of non-renewable secondary fuels; FW = Use of net fresh water.
General disclaimerThe results of the end-of-life stage (modules C1-C4) should be considered when using the results of the product stage (modules A1-A3/A1-A5 for services).

Waste indicators according to EN 15804

IndicatorUnitA1-A3A4A5B1B2B3B4B5B6B7C1C2C3C4D
HWDkg5.73E+12.77E+05.29E+1NDNDNDNDNDNDND9.21E-18.30E-19.01E+14.79E+0-9.01E+1
NHWDkg3.13E+14.18E+01.19E+1NDNDNDNDNDNDND1.14E+01.25E+01.52E+29.12E+0-1.42E+2
RWDkg5.46E-31.22E-47.55E-5NDNDNDNDNDNDND1.22E-53.68E-59.29E-55.06E-6-8.71E-5
AcronymsHWD = Hazardous waste disposed; NHWD = Non-hazardous waste disposed; RWD = Radioactive waste disposed.
General disclaimerThe results of the end-of-life stage (modules C1-C4) should be considered when using the results of the product stage (modules A1-A3/A1-A5 for services).

Output flow indicators according to EN 15804

IndicatorUnitA1-A3A4A5B1B2B3B4B5B6B7C1C2C3C4D
CRUkg8.93E+02.26E-17.68E-1NDNDNDNDNDNDND3.53E-26.75E-22.45E-11.29E-2-2.45E-1
MFRkg1.42E+13.94E-11.05E+0NDNDNDNDNDNDND4.88E-21.18E-16.73E-13.46E-2-6.39E-1
MERkg1.85E+03.71E-22.69E-2NDNDNDNDNDNDND3.15E-31.11E-21.09E-15.72E-3-1.09E-1
EEEMJ, net calorific value3.91E-16.47E-23.55E-2NDNDNDNDNDNDND4.35E-31.94E-23.83E-11.93E-2-3.64E-1
EETMJ, net calorific value0.00E+00.00E+00.00E+0NDNDNDNDNDNDND0.00E+00.00E+00.00E+00.00E+00.00E+0
AcronymsCRU = Components for re-use; MFR = Materials for recycling; MER = Materials for energy recovery; EEE = Exported electrical energy; EET = Exported thermal energy.
General disclaimerThe results of the end-of-life stage (modules C1-C4) should be considered when using the results of the product stage (modules A1-A3/A1-A5 for services).

Results for additional scenarios for modules A4-C4

Additional scenario100% LANDFILLING
Description of the scenario/method100% landfill, in which the entire mass is disposed of to landfill, while material recycling and energy recovery are omitted
Results for additional scenarios for modules A4-C4
Impact categoryIndicatorUnitA1-A3A4A5B1B2B3B4B5B6B7C1C2C3C4D
Climate change - totalGWP – totalkg CO2e0.00E+01.51E+20.00E+0
Climate change - GWP-GHGGWP – GHGkg CO2e0.00E+01.51E+20.00E+0
Climate change - fossilGWP – fossilkg CO2e0.00E+01.51E+20.00E+0
Climate change - biogenicGWP – biogenickg CO2e0.00E+03.72E-20.00E+0
Climate change - land use and land-use changeGWP – LULUCkg CO2e0.00E+06.46E-20.00E+0
Ozone depletionODPkg CFC 11 eq.0.00E+06.90E-70.00E+0
AcidificationAPmol H+ eq.0.00E+03.05E-10.00E+0
Eutrophication aquatic freshwaterEP-freshwaterkg P eq.0.00E+01.42E-10.00E+0
Eutrophication aquatic marineEP-marinekg N eq.0.00E+04.69E-20.00E+0
Eutrophication terrestrialEP-terrestrialmol N eq.0.00E+05.30E-10.00E+0
Photochemical ozone formationPOCPkg NMVOC eq.0.00E+07.75E-10.00E+0
Depletion of abiotic resources - minerals and metalsADP-minerals&metals*kg Sb eq.0.00E+08.94E-50.00E+0
Depletion of abiotic resources - fossil fuelsADP-fossil*MJ0.00E+05.79E+20.00E+0
Water useWDP*m30.00E+04.66E+00.00E+0
PEREMJ0.00E+04.13E+00.00E+0
PERMMJ0.00E+05.79E+00.00E+0
PERTMJ0.00E+09.92E+00.00E+0
PENREMJ0.00E+02.57E+20.00E+0
PENRMMJ0.00E+03.52E+20.00E+0
PENRTMJ0.00E+06.10E+20.00E+0
SMkg0.00E+02.61E-10.00E+0
RSFMJ0.00E+03.72E-20.00E+0
NRSFMJ0.00E+01.08E-10.00E+0
FWm30.00E+01.43E+00.00E+0
Hazardous waste disposedkg0.00E+01.54E+20.00E+0
Nonhazardous waste disposedkg0.00E+01.15E+20.00E+0
Radioactive waste disposedkg0.00E+06.49E-50.00E+0
Components for re-usekg0.00E+06.21E-10.00E+0
Material for recyclingkg0.00E+04.69E-10.00E+0
Materials for energy recoverykg0.00E+03.57E-10.00E+0
Exported energy, electricitykg0.00E+03.50E-10.00E+0
Acronyms
Disclaimers
General disclaimerThe results of the end-of-life stage (modules C1-C4) should be considered when using the results of the product stage (modules A1-A3/A1-A5 for services).

Results for additional scenarios for modules A4-C4

Additional scenario100% RECYCLING
Description of the scenario/method100% recycling, in which the entire mass after deconstruction is directed to recycling, while landfilling and energy recovery are omitted.
Results for additional scenarios for modules A4-C4
Impact categoryIndicatorUnitA1-A3A4A5B1B2B3B4B5B6B7C1C2C3C4D
GWP – totalkg CO2e3.82E+10.00E+0-1.49E+2
GWP – GHGkg CO2e3.82E+10.00E+0-1.49E+2
Climate change - fossilGWP – fossilkg CO2e3.81E+10.00E+0-1.48E+2
Climate change - biogenicGWP – biogenickg CO2e3.02E-20.00E+0-3.05E-2
Climate change - land use and land-use changeGWP – LULUCkg CO2e6.56E-20.00E+0-9.20E-1
Ozone depletionODPkg CFC 11 eq. 6.63E-70.00E+0-6.56E-7
AcidificationAPmol H+ eq.2.83E-10.00E+0-2.81E-1
Eutrophication aquatic freshwaterEP-freshwaterkg P eq.1.31E-10.00E+0-1.31E-1
Eutrophication aquatic marineEP-marinekg N eq.4.31E-20.00E+0-4.16E-2
Eutrophication terrestrialEP-terrestrialmol N eq. 4.84E-10.00E+0-4.80E-1
Photochemical ozone formationPOCPkg NMVOC eq.7.05E-10.00E+0-7.03E-1
Depletion of abiotic resources - minerals and metalsADP-minerals&metals*kg Sb eq.8.35E-50.00E+0-8.30E-5
Depletion of abiotic resources - fossil fuelsADP-fossil*MJ5.70E+20.00E+0-5.66E+2
Water useWDP*m34.30E+00.00E+0-4.26E+0
PEREMJ3.83E+00.00E+0-3.84E+0
PERMMJ5.33E+00.00E+0-5.30E+0
PERTMJ9.20E+00.00E+0-9.12E+0
PENREMJ2.53E+20.00E+0-2.53E+2
PENRMMJ3.49E+20.00E+0-3.45E+2
PENRTMJ6.00E+20.00E+0-5.96E+2
SMkg2.35E-10.00E+0-2.34E-1
RSFMJ3.52E-20.00E+0-3.52E-2
NRSFMJ3.25E-20.00E+0-2.73E-2
FWm33.86E-10.00E+0-3.81E-1
Hazardous waste disposedkg1.29E+20.00E+0-1.30E+2
Nonhazardous waste disposedkg9.76E+10.00E+0-9.57E+1
Radioactive waste disposedkg6.12E-50.00E+0-6.12E-5
Components for re-usekg6.11E-10.00E+0-4.72E-1
Material for recyclingkg4.67E-10.00E+0-4.69E-1
Materials for energy recoverykg3.56E-10.00E+0-2.42E-1
Exported energy, electricitykg3.55E-10.00E+0-3.55E-1
Acronyms
Disclaimers
General disclaimerThe results of the end-of-life stage (modules C1-C4) should be considered when using the results of the product stage (modules A1-A3/A1-A5 for services).

Abbreviations

Global Warming Potential -total (GWP - total), 

Global Warming Potential - greenhouse gases (GWP-GHS), 

Global Warming Potential - fossil emissions (GWP-fossil),  

Global Warming Potential - biogenic carbon (GWP-biogenic),  

Global Warming Potential - land use and land use change (GWP-luluc),

Ozone Depletion Potential (ODP), 

Acidificaction Potential (AP), 

Eutrophication Potential - freshwater (EP-freshwater), 

Eutrophication Potential - marine (EP-marine), 

Eutrophication Potential - terrestial (EP-terrestial), 

Photochemical Ozone Creation Potential (POCP),  

Total use of renewable primary energy resources (PERT),  

Use of non-renewable primary energy resources used as energy carrier (PENRE), 

Use of non-renewable primary energy resources used as raw materials (PENRM), 

Total use of non-renewable primary energy resources (PENRT),

Use of secondary materials (SM), 

Use of renewable secondary fuels (RSF),  

Use of non - renewable secondary fuels (NRSF), 

Use of net fresh water (FW), 

Hazardoust waste disposed, 

Non-hazardoust waste disposed, 

Radioactive waste disposed, 

Components for re-use, 

Material for recycling, 

Materials for energy recovery, 

Ecported energy, electricity, 

Use of renwable promary energy resources used as raw material (PERM), 

Use of renewable promary energy resources used as energy carrier (PERE), 

Water Deprivation Potential (WDF), 

Abiotic Depletion Potential - fossil fuels (ADP- fossil), 

Abiotic Depletion Potential - minerals and metals (ADP - minerals &metals),  

References

1. EPD International. (2021). General Programme Instructions for the International EPD® System, Version 5.0.0. EPD International AB. Available at: https://www.environdec.com/resources/programme-documents

2. EN 15804+A2:2019 – Sustainability of construction works – Environmental product declarations – Core rules for the product category of construction products.

3. ISO 14040:2006 – Environmental management – Life cycle assessment – Principles and framework.

4. ISO 14044:2006 – Environmental management – Life cycle assessment – Requirements and guidelines.

5. EN 15978:2011 – Sustainability of construction works – Assessment of environmental performance of buildings – Calculation method.

6. ecoinvent v3.10 – Life Cycle Inventory database, Swiss Centre for Life Cycle Inventories, www.ecoinvent.org.

7. PCR 2019:14 Construction Products, Version 2.0.0 (2025-06-02), The International EPD® System. Including c-PCR Concrete and concrete elements.

8. OpenLCA 2.0 – Life Cycle Assessment software, GreenDelta GmbH, Berlin, Germany.

9. GOLDBECK Corporate Design Portal – Basisguidelines and branding requirements, https://goldbeck-corperate-design-portal.azurewebsites.net

10. KOBiZE – Polish National Centre for Emissions Balancing and Management, Annual Polish electricity mix emission factors, https://www.kobize.pl

11. Construction Product Environmental Product Declarations (EPDs) – Used as primary data sources for LCA modeling.

12. GOLDBECK internal production data (2024) –Data provided by GOLDBECK Comfort Sp. z o. o. regarding:

o material compositions (prefabricated concrete elements),

o input volumes of raw materials and admixtures,

o electricity and energy consumption in A3,

o transport distances and logistics in A2 and C2,

o end-of-life assumptions (C1–C4) and recovery potentials (D).

13. EN 206 – Concrete – Specification, performance, production and conformity

14. EN 1992 (Eurocode 2) – Design of concrete structures

15. EN ISO 9001 – Quality management systems – Requirements 

Version history

1