Hager Surface Mounted Door Bottoms

Hager Surface Mounted Door Bottom Sweep products are installed to keep out weather, increase interior comfort, lower utility bills, and reduce noise. They also prevent rain and water from entering by rerouting or returning water. Surface Mounted Door Bottom Sweep products are typically composed of an aluminum extrusion and a plastic/rubber gasket or insert. Gaskets and inserts are available in a variety of materials including vinyl, silicone, neoprene (EPDM), and nylon brush. 13 top selling Surface Mounted Door Bottom Sweep products were assessed to generate this report, including 750 series, 754 series, 756 series, 770 series, 801 series, 802 series, and 872 series including sizes 36”, 48”, 84”, and 96” and Overhead Rain Drips in 810 series in 40” and 76” sizes. All Hager Surface Mounted Door Bottom Sweep products are sold with fasteners (screws and associated hardware) for installation. As fasteners are sold with the product, they are included as raw materials of the product itself rather than as ancillary materials for installation. Surface Mounted Door Bottom Sweep packaging varies between product configurations. Note that Overhead Rain Drip products are installed at the top of the door; however, they are the same size, materials, and are installed the same way as Surface Mounted Door Bottom Sweeps.

This EPD does not comply with EN15804+A2, it is PCR Pilot project for North America market.